Incursion: 3D Play Set - Part 4

Having decided that I was going to use cork for the floor tiles of my Incursion game boards and started work on them, I soon realised that covering the whole board in the same sized cork tiles might leave it looking a little 'samey'.

The Cork floor tiles look great, especially for these detail parts, but over the whole beard, became a bit dull.

The floors depicted on the printed game boards change from area to area and. I decided that following the board more closely and changing the floor coverings would give the game board much more visual appeal. It seemed a bit of a shame to go back over some of the tiles I'd already done, but once I had the idea in my head I just went with it. Incursion's two game boards are different so I retained plenty of cork floor tiles on board number 1, number board 2 got a slightly different treatment.

Lots of cutting out card tiles and lots of PVA. The little bit of curving in the card soon settled.

This certainly wasn't a quick process but it was quite enjoyable all the same. It also allowed me to work in some 'transitions' between different areas on the board, more noticeable on board number 1,  and to delineate some of the rooms.

Incursion Game Board 2, floor almost finished.