Dust Tactics: 3D Gaming Board - Frozen Water Boards WIP

The Victory Bridge campaign that comes with the Dust Tactics: Revised Core Set is focussed on a series of encounters in and around a key crossing; Victory Bridge.

Although I actually played through this campaign when I first starting playig this game using the map tiles the water features the maps depict and the bridges do feature in other campaign seenarios. So to go wiht my Dust Tactics 3D Game Board I wanted to make sure I had all the resources to play those other scenarios too.

I looked through the scenario maps from all of the campaign expansions I have (I'm missing just a few of the newest ones) there appeared to only ever be two water boards shown in any of the scenarios.

Dust Tactics is primarily winter themed so I wanted something to reflect that, so a quick few google images seraches and I quickly decided that ice floes fit the bill.

For simplicity's sake I used the same methods I had already been using. Having played around with cork tiles quite a bit recently I thought I might as well make use of the materials to hand. I'd already made up two standard battened 6mm MDF boards to match the others in preparation, so all I had to do was get a smooth (ish) finish and then start sticking 'random' irregular pieces of cork onto the board.

Ice Floe Board. WIP

The plan is to paint the whole thing white, with some pastel aquatic water shades washed/blended into the ice itself, and to use blues and green (gloss varnished) on the actual water.

Incursion: 3D Play Set - Part 5

So with both Incursion gaming boards marked out and most of the floor tiles in place I went to work on sorting out some walls to give the board it's true 3D feel.

I stuck to a pretty simple method of using foam-core and wood glue, pinning as I glue and removing the pins once dry. I picked up a set of dressmaking pins for making LARP costumes and have honestly found as much, if not more, use making foam-core buildings. I suspect using expanded polystyrene or solid foam insulation might have been quicker, but once I'd started, I deceided to finish it that way.

Walls shown in situ. 40mm based miniature for scale.

It was fun for about the first 3-4 blocks, then it got a bit tedious, perhaps because there was so much ahead. Many weird world war 2 soundtracks were played and many cups of tea were drunk in the making of the rest of them.

I kept the height of the walls to 50mm, with an additional 5mm top. sat on the same surface as the cork tiles, so total actual height ended up around 53mm. Just high enough above the height of a standard model to feel like a wall but not too high so I couldn't get my fingers in to move them around.

Incursion: 3D Play Set - Part 4

Having decided that I was going to use cork for the floor tiles of my Incursion game boards and started work on them, I soon realised that covering the whole board in the same sized cork tiles might leave it looking a little 'samey'.

The Cork floor tiles look great, especially for these detail parts, but over the whole beard, became a bit dull.

The floors depicted on the printed game boards change from area to area and. I decided that following the board more closely and changing the floor coverings would give the game board much more visual appeal. It seemed a bit of a shame to go back over some of the tiles I'd already done, but once I had the idea in my head I just went with it. Incursion's two game boards are different so I retained plenty of cork floor tiles on board number 1, number board 2 got a slightly different treatment.

Lots of cutting out card tiles and lots of PVA. The little bit of curving in the card soon settled.

This certainly wasn't a quick process but it was quite enjoyable all the same. It also allowed me to work in some 'transitions' between different areas on the board, more noticeable on board number 1,  and to delineate some of the rooms.

Incursion Game Board 2, floor almost finished.

Dust Tactics: How to Make a Custom 3D Gaming Board

Following on from the teaser reveal last week of my custom 3D Gaming Board I made for Dust Tactics. Here's a step-by-step to guide on how to build your own. This technique is relatively simple and could be used to make a variety of urban, sci-fi, or post-apocalyptic gaming boards (I would like to use this technique for my Judge Dredd Miniatures board). It was pretty quick, easy and relatively cheap.

Dust Tactics Custom Gaming Board, Finished and In Action

Whilst the whole project was undertaken over a series of months, in terms of actual time spent it could really be done in just a few weekends.

Dust Tactics is a board game and. in the Dust Tactics: Core Revised Set, you get a poster sized play-map. The artwork is what you'd expect from a modern 2D gaming map, high quality, thematic and quite generic. Great to get you started but after a while it seems a little bland.

To variety to the gaming surface, the Dust Tactics: Terrain Tile Map Pack adds 12 double sided terrain boards. The terrain board set essentially adds a different theme to the gaming map, the tiles themselves do not change the basic game mechanic, i.e. they don't for the most part (with the exclusion of water) add significantly different terrain effects. It is however, very shiny. Industrial themed, layered colour variations, worn, stained concrete, direction markers and rusty panels.

Dust Tactics Terrain Tile Set

The Dust Tactics maps and terrain boards feature squares that measure around 93mm. I increased this very slightly to 95mm for ease of measurement. Each tile is 3 squares by 3, but for ease of setting up a table I made sections of 9 by 3 squares. I also made just one section of 3 by 3, to help with certain scenario layout configurations. I didn't change the size too much, so that the Dust Tactics: Warzone Tenements (designed to fit the standard map) would still fit pretty well and not look out of place.

The base of the board is 6mm MDF, batten on the outside only. I use the three drill method, Highly recommended. What's the three drill method? One drill for drilling holes, one drill for counter-sinking and one drill for putting the screw in. I made my first terrain board in this method with a single drill and it took about six hours. I made all these boards with three drills in just over two hours. The Drills I picked up were part of a Ryobi Cordless Rechargeable Drill Twin Pack.

The only picture I could find was the one I took when I made my first terrain board, slowly... with a screwdriver.

The whole board was then covered in cork tiles, cut down to 95mm squares. Every tile had a bevelled edge created with a quick sanding.

Keeping the tiles even was actually trickier than I anticipated.

Gluing the tiles onto the boards (wood glue) and retaining a good fit all the way along was a little difficult (expansion in contact with wood glue perhaps?) and a few had to be cut down (just a mm or two here and there).Since finishing this project I have found a much quicker way of doing this (on some dungeon terrain tests), which I wish I had known about. Cover the whole board in cork, mark the squares and then cut with a sharp knife at a 45 degree angle along both sides of the line, the bevel pops out easily, much quicker and far less effort. Every day is a schoolday!

First three boards, a standard 9 by 9 game size, unpainted, with rubble terrain WIPs.

Once I had a few under my belt is was simply a case of knuckling down and getting it done.

I base coated the top edge of the boards with a dark grey primer and then primed the whole board with a medium grey house paint emulsion. Rather than trying to dry-brush (which as anyone who has tried it, can be challenging on a large flat surface, I kept the base-coat relatively light.

Undercoat with grey house paint emulsion.

Following the first coat I ran a quick diluted coat over the top in the same grey, this filled in the few spots that got missed on the first pass and also gave some areas a patchy, stained effect.

Panted board, with patchy effect, before colour was added.

To ensure there was more colour variation across the board, I split the board into 3 by 3 sections, using a straight edged mask and here and there, began sponging on colour variations. This was simply a case of choosing a variety of greys, browns, ochres and even some blue and green (more subtle) and after a few tests I stipple sponged on the colour. I added a few smaller squares (hatches or patches on concrete) for more variation.

To add to the industrial feel a drew up some stencils of directions and hazard markings on plain white paper and once again (this time using white, black, red and yellow) sponged on the markings.

Sponging on the markings

Once all of the main colouring was complete a ran over the whole board with a VERY light dry-brushing in a much lighter grey, literary just enough to catch the corners of the squares.

Dust Tactics Custom Gaming Board: Finished, without terrain.

All in all I was very pleased with the result. I have a few more specific pieces to make, two open water boards, one submarine and some customer 'blocking' terrain pieces. The table is likely to get a public outing  as a friend of mine and I are putting on a Dust Tactics display game at the Eastern Front Wargames Show on Sunday 27th July 2014 in Norwich.

Dust Tactics Custom Gaming Board: In Action